TV One 1T-C2-100 Specifications Page 34
- Page / 81
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1T-C2 SERIES OPERATION MANUAL
29
Note that some units do not have the [On] entry – this is only for units with a PIP
button on the front, with turns this entry On and Off. On these units, this feature is
‘Off’ by default, so that the full image size of 100% is used. Shrink level will need to
be turned On before any change to this value has an effect.
This menu option determines the position of the shrunken image on the monitor
screen. This will move an image that is less than the full screen size left/right or
up/down within the monitor’s available screen space. It will not let you move the
image off the screen, so certain values will appear to have no effect (unless you
use a very low Shrink value like 10%).
This item provides a simple way of changing the output screen aspect ratio, to suit
the incoming video signal and final output display size. Use the zoom/shrink
functions for occasions when the aspect ratio is an odd format.
See later section for further details on this item.
This is a feature only present in advanced units only. It greatly improves the
method of frame-rate conversion, by allowing the unit to merge frames together
during the process.
When ‘Off’, the unit will use frame-repetition when converting 50Hz to 60Hz (i.e. it
has to duplicate every 5th frame), or frame-dropping when converting 60Hz to 50Hz
(i.e. it has to drop every 6
th
frame). When ‘On’, smooth blending is applied so that
frames are not lost, but blended together at the appropriate times.
The Flicker Reduction menu item will only appear if you have selected a low
resolution interlaced output such as PAL or NTSC. If you are using CV or YC
outputs, this adjustment may be of interest, particularly when you have line
drawings or similar fine detail. You can choose from four possible Flicker Reduction
settings. You should use as little Flicker Reduction as possible because the Vertical
detail will be softened at the highest setting.
Flicker mode Function
Adjust windows
Temporal interp. [Off]
Adjust windows
Aspect change [Normal]
Adjust windows
Flicker Reduction [Low]
Adjust windows
Aspect adjust [Simple]
Adjust windows
H/V position % [100] [ 50]
- 1T-C2 Series 1
- Operation Manual 1
- 1T-C2 SERIES OPERATION MANUAL 2
- Table of Contents 3
- 1 DISCLAIMER 6
- ERIES OPERATION MANUAL 10
- 3 DEVICE SUMMARY 18
- 4 PRODUCT IMAGES 20
- 5 FRONT PANEL CONTROLS 21
- 6 VIDEO INPUTS AND OUTPUTS 24
- 7 INFRA-RED REMOTE CONTROL 26
- 0 768 37
- 0 37
- 9 RS232 PORT 54
- 11 COMMON OPERATIONS 69
- 13 RETURN PROCEDURE 74
- 14 WARRANTY POLICY 76
- 15 CONNECTOR PINOUTS 77
- 16 SPECIFICATIONS 78
- 17 CONTACT INFORMATION 81
Related products and manuals for Video converters TV One 1T-C2-100
(12 pages)Hitachi AA 2000 manuels
Manuels d'utilisation et guides de l'utilisateur pour Pulvérisateur de peinture Hitachi AA 2000.
Nous fournissons des manuels en pdf 1 Hitachi AA 2000 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals