TV One 1T-FC-766 Instruction Manual download pdf (Page 10)

Notes:

1) A DVD’s HDMI default timing is often set on 480p but SDI does not support

that timing so it’s possible that the image will not display on the SDI monitor. To

avoid such an event, it’s suggested that you set the source output timing to the

“AUTO mode” so that the source equipment will read the 1T-FC-766 default input

setting and send the proper EDID native timing.

2. Only when the EDID button is held down will the EDID update procedure

progress. When the update is complete, the Video Lock LED will illuminate. If

the button is not pressed the Video Lock LED will illuminate according to the

System Signal Status.

3. When the EDID circuit reads DVI mode, the system will check if the EDID’s

native mode supports SDI timing. If yes, the display will show the signal as SD-

SDI, HD-SDI or 3G-SDI Mode as appropriate. If it the EDID native mode does

not support SDI timing, the system will automatically default to DVI EDID Native

3G mode.

4. If there is an EDID format error during cloning (Header error, Checksum error

or EDID error), the default User EDID will not be changed.

6.0 TROUBLESHOOTING

Other than faulty cables or attempting to use the product over too great a

distance, there are seldom problems with the 1T-FC-766.

If there is no image present at the remote location, connect the display device

directly to the source to make certain that the problem is not in the display. If an

image is present under those circumstances, make certain the unit is receiving

power. Next make certain your cables are defect free and securely attached to

the cable at each end. After trying the above suggestions should the problem still

persist, contact your dealer for additional suggestions before contacting TV One.

Should the dealer’s technical personnel be unable to assist you, contact TV One

via our support website: http://tvone.crmdesk.com. Create a technical support

request on the site and our support team will respond within a short period of

time.

7.0 LIMITED WARRANTY

TV One warrants the original purchaser that the equipment it manufactures or

sells will be free from defects in materials and workmanship for a fixed term from

the date of purchase. The warranty term for specific product lines is defined

below.

1 2 ... 5 6 7 8 9 10 11 12

No comments

TV One 1T-FC-766 Instruction Manual Page 10